1 3 4 2 pressure switches ps40 1 2 3 4 part name material pressure port housing o ring port block pom (polyoxymethylene) pc (polycarbonate) fluoro-rubber lcp (liquid crystal polymer) internal structure (m5 female screw) compatible with non-corrosive gases solidstate pressure switch with no mechanical moving parts 2 types of pressure ports are available open collector output of either npn or pnp is available analog output type available features model number designation p s 4 0 - 1 0 2 g - n a r series name rated pressure range 501 0 ~ 50 kpa 102 0 ~ 100 kpa 103 0 ~ 1000 kpa pressure reference g gauge v gauge (vacuum) switch output interface n npn open collector p pnp open collector pressure port outputs a 1 switch output with adjustable hysteresis and analog output w 2 switch output r r 1/8 male screw m m 5 female screw list of model numbers pressure port r 1/8 male screw m 5 female screw outputs adjustable hysteresis switch output + analog output npn open collector output pnp open collector output npn open collector output pnp open collector output npn open collector output pnp open collector output npn open collector output pnp open collector output 2 points switch output adjustable hysteresis switch output + analog output 2 points switch output switch output yy 102v y 501g y 102g yy 103g ? 100 kpa 50 kpa 100 kpa 1000 kpa ps40-102v-nar ps40-501g-nar ps40-102g-nar ps40-103g-nar ps40-102v-par ps40-102g-par ps40-103g-par ps40-102v-nwr ps40-501g-nwr ps40-102g-nwr ps40-103g-nwr ps40-102v-pwr ps40-102g-pwr ps40-103g-pwr ps40-102v-nam ps40-501g-nam ps40-102g-nam ps40-103g-nam ps40-102v-pam ps40-102g-pam ps40-103g-pam PS40-102V-NWM ps40-501g-nwm ps40-102g-nwm ps40-103g-nwm ps40-102v-pwm ps40-102g-pwm ps40-103g-pwm : not available verify the above model numbers when placing orders.
ps40 pressure switches general specifications power standard specifications item pressure reference rated pressure range maximum pressure break-down pressure operating temp. range compensated temp. range storage temp. operating humidity supply voltage pressure medium insulation resistance dielectric strength pressure port net weight model number 102v 501g 102g 103g gauge ? 100 50 100 1000 200 100 200 1500 500 250 500 2000 non-corrosive gases approx. 50 10.8 ~ 30 v including ripple percentage 100 (500 v dc) 500 v ac, 60 s leakage current 1 ma maximum r 1/8 m5 female screw or o ring groove m5 female screw 0 ~ 50 35 ~ 85 no condensation ? 20 ~ 80 ? 20 ~ 70 kpa kpa kpa c c %rh c v dc m minimum g consumption current 17 ma only w type 25 ma maximum maximum output interface setting method adjustable range display no. of outputs 1 or 2 open collector output (npn or pnp) adjustable by vr zero through rated pressure minimum red led on (w type only : sw1 red, sw2 green) switch output analog output accuracy 0 ~ 50 c (reference temp.: 25 c) hysteresis % f.s. switching capacity residual voltage response output voltage zero voltage span voltage output current 30 v 80 ma 0.8 (npn), 1.2 (pnp) approx. 1 1 ~ 5 1 0.1 4 0.1 1 load resistance 5 k minimum v maximum ms v v v ma maximum 3 approx. 1 ~ 15 % of the set value (w type only 2 % f.s. maximum) unless otherwise specified, the specs are defined at an ambient temperature of 255 c and excitation voltage of 12 v dc.
2 C 3.3 through hole polycarbonate 22.4 r 1/8 3.1 24.80.3 20.3 11 2 C 3.3 through hole 4-core shielded cable l = 1500 50 indicator led1 (red) polyacetal m 5 depth 5 pressure port 8.50.3 4.5 450.5 15 awg 26 ulno.2844 indicator led 2 (green) t in case of 2 switch outputs () label pressure setting vr t no.1 switch setting in case of 2 switch outputs hysteresis adjustment vr t no.2 switch setting in case of 2 switch outputs ( 3.8) label m 5 depth 5 pressure port 2 C m 3 depth 4.5 10 13 8 15 2 C 3.3 through hole through hole polycarbonate 22.4 3.1 19 24.80.3 12 20.3 11 2 C 3.3 pressure setting vr t no.1 switch setting in case of 2 switch outputs hysteresis adjustment vr t no.2 switch setting in case of 2 switch outputs indicator led1 (red) polyacetal 4.5 450.5 indicator led 2 (green) t in case of 2 switch outputs ( ) 4-core shielded cable l = 1500 50 awg 26 ulno.2844 ( 3.8) ps40 pressure switches outline dimensions unless otherwise specified, tolerance : 0.5 (unit: mm) nar, par, nwr, pwr nam, pam, nwm, pwm environmental characteristics test item test conditions (at 25 5 c) permissible change vibration 10 ~ 500 hz, 1.5 mm maximum/98.1 m/s 2 , 3 directions for 2 hours each 490 m/s 2 , 3 directions for 3 times each 0~rated pressure, 10 6 cycles 40 c, 90 ~ 95 %rh, 240 hrs. switch output setting and analog output (zero voltage/span voltage): 2 %f.s. maximum, each shock pressure cycling moisture resistance
ps40 pressure switches / " .
/ " 3 / 1 / ps40-102v ps40- ??? g 1 " .
1 " 3 1 / 1 / 8 .
/ 8 3 / 1 / 1 8 .
1 8 3 1 / 1 internal electrical schematics switch output schematics fg a.output !y indicator common sensor power b main circuit s.output load pressure fg a.output common s.output power b load pressure main circuit sensor !y indicator fg 1 !y indicator 2 load s.output2 common sensor power b main circuit s.output1 load pressure fg 2 !y indicator 1 common s.output2 power b load load pressure main circuit sensor s.output1 off hysteresis set value hysteresis set value 100 kpa rated pressure barometic pressure barometic pressure on off on t ? a ? is adjustable hysteresis type. wire color brown black white blue shield connection power b switch output analog output common n.c. ps40 (nam, nar, pam, par) wire color brown black white blue shield connection power b switch output 1 switch output 2 common n.c. ps40 (nwm, nwr, pwm, pwr)
|